This soap uses Aloe Vera Liquid (Bramble Berry) in place of the water. Aloe Vera adds moisturizing properties to soap and makes for a dense and lotion-like lather. You can harvest your own Aloe Vera or you can use the liquid from Bramble Berry.

Photo by Busy Bee Creative – Product PhotographyAloe Vera Soap – Lavender Mint – In The Pot Soap Swirl

Lavender Mint Aloe Vera Soap Recipe

1 lb Palm-free Recipe (Fits in short silicone loaf mold from WSP. Perfect for test batches.)

Coconut Oil – 136 grams (30%)
Olive Oil – 160 grams (35%)
Avocado Oil – 68 grams (15%)
Castor Oil – 45 grams (10%)
Apricot Kernel Oil – 45 grams (10%)
Sodium Hydroxide – 63 grams
Aloe Vera Liquid – 126 grams
Lavender Essential Oil – 15 grams
Peppermint Essential Oil – 15 grams
Kelly Green Mica (Bramble Berry) – 1/4 teaspoon
Kermit Green Mica (Bramble Berry) – 1/4 teaspoon + 1/8 teaspoon
Lavender Mica (Bramble Berry) – 1/4 teaspoon
White Mica – 1/2 teaspoon

2 lb Palm-free Recipe (Fits high in 8″ silicone loaf mold or just under full in 10″ silicone loaf mold.)

Coconut Oil – 272 grams (30%)
Olive Oil – 320 grams (35%)
Avocado Oil – 136 grams (15%)
Castor Oil – 90 grams (10%)
Apricot Kernel Oil – 90 grams (10%)
Sodium Hydroxide – 126 grams
Aloe Vera Liquid – 252 grams
Lavender Essential Oil – 30 grams
Peppermint Essential Oil – 30 grams
Kelly Green Mica (Bramble Berry) – 1/2 teaspoon
Kermit Green Mica (Bramble Berry) – 1/2 teaspoon + 1/4 teaspoon
Lavender Mica (Bramble Berry) – 1/2 teaspoon
White Mica – 1 teaspoon

Safety Warning: This recipe is for soapmakers who have a basic knowledge of the soapmaking process and know the correct safety procedures to use when handling lye. If you are new to soapmaking, visit our free soap making guide or check out our Basic Soapmaking eBook. Be sure to wear safety goggles and gloves while soaping.

Step 1 – Create your lye solution. Weigh out the Aloe Vera Liquid and sodium hydroxide into separate containers.

Step 2 – In a well-ventilated area, sprinkle the sodium hydroxide into your Aloe Vera Liquid while stirring slowly. Stir until dissolved and set aside to cool. Your solution might turn yellow or orange. This is normal when making a lye solution with Aloe Vera Liquid or fresh Aloe Vera.

aloe vera for soap

aloe vera lye solution

Step 3 – Weigh out the coconut oil and melt, just until melted.

Step 4 – Weigh the liquid oils and add to the melted oils.


Step 5 – Add essential oils to the oil mixture. Mix.

Step 6 – Pour the lye solution into oils and bring to light trace.

aloe-soap aloe-vera-soaping mixing-aloe-vera-soap soaping-with-aloe-vera

Step 7 – Divide the mixture evenly into four containers. For three containers, color each with kelly green, kermit green and lavender mica. In the base container, color using the second amount of kermit green and white mica to create a light green base.

mica-bramble-berry mica-color-soap IMG_0760

Step 8 – To create an in-the-pot swirl, simply pour each base color back into your main pot as shown. I usually aim for pouring the soap into three areas of the base, rotating colors. There really isn’t a wrong or right way to do it. If your soap gets thick, no worries. Mine got a bit thick.

soap-pot-swirl in-the-pot-swirl swirling-soap-pot

Step 9 – Using a spatula or spoon, turn the soap once. This helps to swirl the soap.


Step 10 – Pour the soap into your mold. This is where the magic happens. As you pour, the soap swirls even more.

pouring-soap IMG_0770 IMG_0773 IMG_0774

Let sit for 24 hours to saponify and harden. Remove after 24 hours in the mold. Cut and let cure for 4 weeks.

IMG_0846 IMG_0847

Happy Soaping!

Amanda Gail