This soap uses fresh yogurt as part of the water. Yogurt is full of skin-loving ingredients, including lactic acid, bacterial cultures and vitamins. This recipe using the milk-in-oil method of soaping (the yogurt is added to oils).
Photo by Busy Bee Creative – Product Photography
Juniper Lemon Yogurt Soap Recipe
1 lb Palm-free Recipe (Fits in short silicone loaf mold from WSP. Perfect for test batches.)
Coconut Oil – 136 grams (30%)
Shea Butter – 45 grams (10%)
Avocado Oil – 45 grams (10%)
Olive Oil – 228 grams (50%)
Sodium Hydroxide – 64 grams
Water – 70 grams
Plain Yogurt – 60 grams
Hot Man on a Tin Roof Mica (Mad Oils) – 1/4 teaspoon
Maniacal Pea Mica (Mad Oils) – 1/4 teaspoon
Silverfin Blue Mica (Mad Oils) – 1/4 teaspoon
Juniper Essential Oil – 15 grams
Lemongrass Essential Oil – 15 grams
Coconut Oil – 272 grams (30%)
Shea Butter – 90 grams (10%)
Avocado Oil – 90 grams (10%)
Olive Oil – 456 grams (50%)
Sodium Hydroxide – 128 grams
Water – 140 grams
Plain Yogurt – 120 grams
Hot Man on a Tin Roof Mica (Mad Oils) – 1/2 teaspoon
Maniacal Pea Mica (Mad Oils) – 1/2 teaspoon
Silverfin Blue Mica (Mad Oils) – 1/2 teaspoon
Juniper Essential Oil – 30 grams
Lemongrass Essential Oil – 30 grams
Safety Warning: This recipe is for soapmakers who have a basic knowledge of the soapmaking process and know the correct safety procedures to use when handling lye. If you are new to soapmaking, visit our beginner instructions. Be sure to wear safety goggles and gloves while soaping.
Step 1 – Create your lye solution. Weigh out the water and sodium hydroxide into separate containers.
Step 2 – In a well-ventilated area, sprinkle the sodium hydroxide into your water while stirring slowly. Stir until dissolved and set aside to cool.
Step 3 – Weigh out the coconut oil and Shea butter and melt, just until melted.
Step 4 – Weigh the liquid oils and add to the melted oils.
Step 5 – Add yogurt and essential oils to the oil mixture. Mix.
Step 6 – Pour the lye solution into oils and bring to light trace.
Step 7 – Divide the mixture evenly into four containers. Color each one with a different mica. One will remain uncolored. You can use white mica to lighten it up.
Step 8 – Pour thin lines of soap up the center of the length of your mold. Rotate the colors until you fill the mold up.
When you cut it, you’ll get this really cool tiger stripe design!